Guyson blast equipment uses compressed air to propel blast media directly at the component through an exclusively designed blast gun. These clean and safe operations are carried out in an illuminated cabinet from which dust is constantly removed and the blast media is recycled to provide a continuous and reliable cleaning and finishing system.
Brochures
To view PDF brochures you will need Adobe Acrobat Reader. If you do not have this software please use the link provided to download a FREE copy.
To view PDF brochures click the buttons below. To download and save the PDF to your computer right click the button, select 'Save Target As..' and choose a destination to save the file to.
MANUAL BLAST CABINETS
Recognised worldwide as the highest quality available, Guyson Euroblast® systems come in an extensive range of sizes with a variety of options on blast guns and nozzles, turntables, cyclones and filtration systems. Available as suction feed or pressure feed, depending on your requirements.
Euroblast brochure
Euroblast 7PF pressure feed system with pressure pot, cyclone reclamator and dust collector.
The Mediblast 1400 stainless steel blast cabinet has been specially engineered for medical product manufacturers, laboratories etc, where the introduction of ferrous contamination must be avoided.
The entire cabinet is manufactured from high quality 316L stainless steel, and the powerful model 900 blast gun has both a polyurethane body and a stainless air control jet, making the Mediblast 1400 ideal for a broad range of medical surface preparation, finishing and cleaning applications.
This Multiblast® RXS900 machine was produced for Bang & Olufsen A/S. An automatic rotary table surface finishing system produces a consistent, low profile, matt finish on shaped aluminium tubes prior to anodising.
The final product was used in a range of cordless aluminium telephones and remote controls.
Multiblast® RXS900 automatic rotary table surface finishing system
The compact Multiblast® RXS400
The RXS400 Rotary Indexing Spindle blast machine was designed specifically for the work-cell manufacturing environment.
Occupying less than 1 square metre of floor space, its footprint is only 900mm wide and 900mm deep, small enough to fit into the most compact manufacturing cell, yet it is capable of precise and repeatable impact treatment in single piece work flow manufacturing operations.
The Guyson Multiblast® RSB is equipped with a single rotary work spindle on which the component is placed, usually in a specially designed fixture, and loaded by hand or by robot.
Multiblast® RSB machines have been installed for a wide range of applications, including deburring turbochargers, preparation of tooling prior to PVD coating, surface conditioning on medical implants prior to ceramic coating, peening of precision gears for the aircraft industry - and the list could go on...
Multiblast® RSB with single rotary work spindle
Multiblast® brochure - for RSB see page 5
Multiblast® TR and TRR
Multiblast® TR and TRR blast machines are used where high volumes are required and the component shape or physical size dictates a straight pass in-line through the blast chamber.
Multiblast® TR machines are designed to pass the components through the system, exiting at the back of the machine to an off-load position.
Multiblast® TRR machines pass components through then return them to the start position, either receiving further blasting or air washing on the return or simply passing through the blast chamber to off load.
Multiblast® TR blast machine
Multiblast® brochure - for TR and TRR see page 7
Multiblast® EB1 Endless Belt
The Multiblast® EB1 can be used with hard, fast-cutting abrasives such as aluminium oxide, soft plastic media or low density glass bead.
This is the ideal machine for saturation blast finishing of high volumes of small components. Components are gently tumbled at constant speed under an air powered blast stream on a perforated abrasion resistant rubber belt.
Multiblast® EB1 (Endless Belt) blast finishing system
Multiblast® brochure - for EB1 see page 4
Tumbleblast®
Guyson's range of Tumbleblast® machines includes the T40 and T50, which offer cost effective blast finishing for batch processing. Tumbleblast systems are ideal for cleaning, deburring, deflashing, cosmetic finishing or surface treatment on small metal components such as screws, bolts, nuts, washers, circlips, fastenings etc.
If you need more information or have any questions regarding blast systems and applications why not view our Blast FAQ page. If you would like more in-depth information please feel free to contact one of our friendly staff by phone or email and they will help you in any way they can.
